KRE Logo

Pontiac Gaskets & Seals

Rear Main Seals

This is Tin Indian Performance's Viton rear main seal. Designed for the best oil control that you can get in a seal. We carry both the 3" and 3.25". Works great for stock and aftermarket crankshafts and blocks. Color coded for for correct applications and fit.

Sold as a pair TIP 400 Rear main seal $ 40.00

TIP 455 Rear main seal $ 40.00

Intake Gaskets

The following are intake gaskets from Tin Indian Performance. Standard gaskets are made from Interface material and provide excellent sealing. The D79 gaskets are an enhanced material that holds up to alcohol and special based fuels very well. All gaskets are standard .060 thick unless noted other wise.

Sold as a pair

TIP #110205 Stock D-port $ 12.00

TIP #110205 Stock D-port-D79 $ 15.50

TIP #110205 Stock D-port.090 thick $ 14.00

TIP #110205 Stock D-port-D79 .125 thick$ 24.00

TIP #112205 Trim to fit $ 12.00

TIP #112220 Ram IV $ 12.00

TIP X-over block off for #112220 $ 13.00

TIP #120230 1.20x2.30 size $ 12.00

TIP #120230 1.20x2.30-D79 $ 15.50

TIP #120230 1.20x2.30 size .090 thick $ 14.00

TIP #120230 1.20x2.30-D79 .125 thick $ 24.00

TIP #120240 1.20x2.40 size $ 12.00

TIP #120240 1.20x2.40-D79 $ 15.50

TIP #120240 1.20x2.40 size .090 thick $ 14.00

TIP #120240 1.20x2.40-D79 .125 thick $ 24.00

TIP #125250 1.25x2.50 size $ 14.00

TIP #125250 1.25x2.50-D79 $ 17.50

TIP #125250 1.25x2.50 size .090 thick $ 16.00

TIP #125250 1.25x2.50-D79 .125 thick $ 24.00

TIP #130250 1.30x2.50 size $ 14.00

TIP #130250 1.30x2.50-D79 $ 17.50

TIP #130250 1.30x2.50-D79 .125 thick $ 24.00

TIP #140270 1.40x2.70 size $ 14.00

TIP #140270 1.40x2.70-D79 $ 17.50

TIP #140270 1.40x2.70-D79 .125 thick $ 26.00

TIP #145280 1.45x2.80-D79 $ 17.50

TIP #145280 1.45x2.80-D79 .125 thick $ 26.00

Exhaust Gaskets

Sold as a pair

We carry all three Tin Indian Performance, Fel Pro and SCE's exhaust gaskets. There are a few differences between the them. That's the reason we carry all three. TIP #340D KRE D-port exh.$ 18.00

TIP #1424 D-port exh $ 18.00

SCE #4128 Copper D-port exh. $ 45.00

Fel Pro #1424 D-port Exh. $ 28.00

TIP #1436 Round port exh. $ 18.00

Fel Pro #1436 RP exh. $ 30.00

SCE #4028 Copper RP exh. $ 45.00

TIP RA V .125 thick exhaust $ 26.00

Head Gaskets

Sold as individuals

Fel Pro #8518PT Head Gasket $ 25.00

Fel Pro #1016 Head gasket $ 53.00

These are the multi layer steel gaskets from Cometic. Just another Pontiac part made right here in Ohio. These are great for the one looking for either extra holding strength, thicker gaskets and bigger bores. The bigger bore sizes are are great for the MR-1 block. We have tested quite a few of them and can say they will hold up to over 1000 HP. These are the most popular gaskets we have in stock, thicker sizes can be custom ordered.

Sold as a pair

Cometic 4.200 bore x .040 thick $ 210.00

Cometic 4.200 bore x .050 thick $ 275.00

Cometic 4.200 bore x .060 thick $ 275.00

Cometic 4.250 bore x .040 thick $ 210.00

Cometic 4.250 bore x .050 thick $ 275.00

Cometic 4.250 bore x .060 thick $ 275.00

Cometic 4.300 bore x .040 thick $ 210.00

Cometic 4.300 bore x .050 thick $ 275.00

Cometic 4.300 bore x .060 thick $ 275.00

Cometic 4.380 bore x .040 thick $ 210.00

Cometic 4.380 bore x .050 thick $ 275.00

Cometic 4.380 bore x .060 thick $ 275.00

Misc. Gaskets

Sold as individuals TIP T-cover gasket $ 5.00

TIP Oil pan gasket $ 20.00

TIP water pump gasket $ 5.00

TIP Fuel pump gasket $ 2.00

TIP Oil filter housing $ 2.00 TIP Distributor gasket $ 2.00 TIP T-stat housing $ 2.00 TIP T-cover to Intake gasket $ 2.00 TIP Front oil pan gasket $ 4.00